Cutting Equipment For Webbing

Webbing is widely used, the processing equipment of webbing also requires a high degree of automation, the effect requires exquisite, the traditional webbing cutting is the use of cold shear, hot shear principle, the shearing effect has raw edge, loose edge, uneven incision or yellow, hair coke. In order to improve this situation, using the principle of ultrasonic cutting webbing, can realize automatic cutting, ultrasonic sealing, no yellowing, hair coke, to achieve the ideal effect. Webbing shearing main equipment are: automatic webbing shearing machine, automatic webbing punching shearing machine, semi-automatic webbing shearing machine, are the use of ultrasonic principle to complete the cutting of webbing.
Cutting of webbing
The cutting of webbing usually adopts two methods: one is manual cutting, the other is machine cutting.
Manual cutting is usually done by heating with hot wire or guillotine cutting. These two kinds of cutting processes require little equipment but cost a lot of labor. In addition, cutting with hot wire can produce a lot of smoke. And leave scorch marks on the cut surface of the ribbon. Guillotine cut without smoke or burn marks. But can not effectively seal will appear loose (that is, beard edge) phenomenon.
Using automatic cutting machine: cutting machine is divided into hot cutting machine, cold cutting machine and ultrasonic cutting machine.